Hdmi Input; Operation; Switching On/Off The Tv Set; Choose The Menu Language - Haier HL Series Owner's Manual

Operation

A
Select 3 or 4 with channel switch on cable box.
B
Tune the TV channel to the same selected output
channel on cable box.
C
Select channels at the cable box or with the cable
box remote control.
Connection Option 2
A
Connect the audio and video cables from the Cable
Box's output jacks to the TV input jacks, as shown in the
figure.When connecting the TV to a Cable Box, match
the jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
B
Select the input source by using the
on the remote control or on the TV.
C
Select your desired channel with the remote control
for cable box.

HDMI input

How To Connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
How To Use
A
Select the input source by using
the remote control or on the TV.
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.
EN-11 TV LCD-TFT Owner's Manual
INPUT button
INPUT button on
Operation
In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.

Switching On/Off the TV set

A
First, connect power cord correctly.
B
Select the viewing source by using
the remote control.
C
When finished using the TV, press
the remote control. The TV reverts to standby mode.
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
If the TV in power on , the screen show information
according the type of input signal, the information
will disappear. If there is no signal, "No Signal" will
display on the screen.

Choose the Menu Language

When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
Choose TV Input and then press MENU button.
B
Press / button to select Function menu.
C
Press or ENTER button and then use
button to select Language.
D
Press / button to select language.
( English, Spanish or French)
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock Closed Caption
Default
Function
INPUT button on
POWER button on
/
English
Short
Middle
Normal
On
On
/ Select EXIT Back