LinPlug Albino 3 Manual page 57

When the Divider control (described above) is set to a value other than 1, a
new output sample value must be created for each group of samples in the
input audio stream. For example, if the Divider slider is set to a value of 4,
then four (possibly different) samples in the input stream are replaced by
four samples with a single value in the output audio stream. The Divider
Type popup menu determines how the output sample value is created from
the input samples. Three options are available: "AVG", "STP" and "SLD".
The "AVG" ("Average") option calculates the average of the input samples
and uses this as the output sample value for each of the input samples.
The "STP" ("Step") option takes the first sample in each group of input
samples and uses this as the output sample value for each of the input
samples. The "SLD" ("Slide") option takes the first sample in each group of
input samples, interpolates between them and uses the interpolated value
as the output sample value for each of the input samples.
The Fil Post Div ("Filter Post Divider") control is used to set the position of
the LoFi's Filter with respect to the Divider. By default, the Filter is before
the Divider in the signal path. Switching this button on moves the Filter to
after the Divider in the signal path.
The Auto-Vol control allows a compressor/expander to be switched into the
signal path. This reduces the overall effect of the LoFi making the sound
less harsh and more "musical".
Rob Papen Albino 3.0 57