Amp - LinPlug Albino 3 Manual

Amp

The Albino 3's Amp section is located to the right of the Filter section. This
section contains controls for routing the filters' outputs as well as general
controls for setting the synth's amplitude.
The output from all four filters can be sent to either Effect 1, Effect 2, Effect
3, Effect 4 or to Effects 1 and 3 simultaneously by clicking on the output
buttons to the right of the filter module. Filter 1 has an additional option; its
output can be sent to Filter 2.
Rob Papen Albino 3.0 29