Stage Envelope - LinPlug Albino 3 Manual

many acoustic instruments). Reverse Track produces an unnatural effect
which is useful for more experimental sounds.
Pitch Scaling is often used in creating Patches that have different
amplitude release characteristics across their range. By setting an
amplitude envelope's Pitch Scaling parameter to a value greater than 0 you
can create a Preset in which low frequency notes have a longer release
time while the high frequency notes have a short release time. Velocity
Scaling can be used in a similar manner.
The Sync controls switches the envelope between Time and Sync modes.
When set to Time mode, the envelope's controls work in units of seconds.
When set to Sync mode, the envelope's controls work in units of fractions
of a bar, where a value of 16 represents one bar. This is useful if you want
to synchronise and envelope segment with the song's current tempo.

5 Stage Envelope

In the 5 Stage Envelope each section of the envelope has its own Time
and Level setting. The Time setting indicates the time (in seconds) it takes
for the signal amplitude to reach the corresponding Level setting.
In the above example the full level (100) is reached in 42 milliseconds (ms)
after the note has started. The envelope stays at 100% for 190 ms, drops
to 45% within 596 ms (or 0.596 seconds) and raises to a sustain level of
92% within 4.625 seconds.
Note that the 4 th level is always the Sustain level and the 5 th time and level
are the release time and the release level. The release level should
normally be 0.
Rob Papen Albino 3.0 33