First Steps - Frigidaire 241666500 Use & Care Manual

This Use and Care Manual provides specific assembly,
operating and maintenance instructions for your model. Use
the beverage center only as instructed in this Use and Care
Manual. Before starting the beverage center, follow these
important first steps.
PARTS
Your beverage center comes with a box that contains all the
required parts and accessories. Check to make sure that you
have received the box containing all of the components listed
below. You will need the following tools to assemble the
beverage center.
Flat Tip
Screwdriver
Adjustable Wrench
BEVERAGE DELIVERY KIT BOX
(1) Sump
(2) Drip Tray
(3) Facade
(4) Sump Valve
(5) Nut & Rubber Washer (Black)
(1 nut and 2 washers included with sump valve)
(6) Faucet and Shank Assembly
(7) Plastic Collar
(8) Shank Nut
(9) Faucet Knob
(10) CO Regulator (with plastic washer)
2
(11) Keg Coupler
(12) Clear Hose (Delivery Line)
(13) Braided Hose (Gas Line)
(14) Worm Clamp (Included with Gas Line Hose)
(15) Rubber Washer (Black)
(Included with Delivery Line Hose)
(16) CO Canister (Empty)
2

FIRST STEPS

Phillips TM
Screwdriver
Socket Wrench
1 piece
1 piece
1 piece
1 piece
2 pieces
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
2 pieces
2 pieces
1 piece
N O T E N O T E N O T E N O T E N O T E
The box comes with a "D System" type Keg Coupler (11).
Depending on your choice of beer, you may require a
different Keg Coupler (11). Check with your local beer
distributor to determine which type system you need, and
order additional Key Couplers as needed. For assistance
call Electrolux Consumer Services at 1-800-944-9044
8
.