STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 2CH Speaker.
STEP 3:
Connect a speaker or headphone to the rear Line
Out jack, a small window will pop up and ask
you what type of equipment is connected.
Choose Headphone or Line Out depending on
the device connected and click OK. The 2-chan-
nel audio setup is completed.
Setting Up 4-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager
icon in your system tray
(you can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
GA-945GCM-S2 (rev. 2.1) Motherboard
- 68 -