Audio Connectors - Gigabyte GA-8VT800 User Manual

P4 titan series motherboard
Hide thumbs Also See for GA-8VT800:
Table of Contents

Advertisement

w USB /LAN* Connector
LAN*
USB 4
USB 5
x Audio Connectors
Line In(Rear Speaker)
Line Out
(Front Speaker)
MIC In(Center and Subwoofer)
If you want the detail information for 2-/4-/6-channel audio setup
installation, please refer to page 65.
" * " FOR GA-8VT800-L Only.
GA-8VT800(-L) Motherboard
Ø Before you connect your device(s) into USB
connector(s), please make sure your
device(s) such as USB keyboard,mouse,
scanner, zip, speaker..etc. Have a standard
USB interface. Also make sure your OS
supports USB controller.
If your OS does not support USB controller,
please contact OS vendor for possible patch
or driver upgrade. For more information
please contact your OS or device(s) vendors.
Ø After install onboard audio driver, you may
connect speaker to Line Out jack, micro phone
to MIC In jack.
Device like CD-ROM , walkman etc can be
connected to Line-In jack.
Please note:
You are able to use 2-/4-/6- channel audio
feature by S/W selection.
If you want to enable 6-channel function, you
have 2 choose for hardware connection.
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC Out".
Method2:
You can refer to page 26, and contact your
nearest dealer for optional SUR_CEN cable.
- 18 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-8vt800-l

Table of Contents