Usb Controller - Gigabyte GA-8IPE1000 Series User Manual

On-Chip Primary PCI IDE
Enabled Enable onboard 1st channel IDE port. (Default v alue)
Disabled Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled Enable onboard 2nd channel IDE port. (Default v alue)
Disabled Disable onboard 2nd channel IDE port.
On-chip SATA
Disabled
Auto
Manual
SATA Port0 Configure as
IDE Pri. Master
IDE Pri. Slav e
IDE Sec. Master
IDE Sec . Slav e
SATA Port0
SATA Port1
SATA Port1 Configure as
The v alues depend on SATA Port0 .

USB Controller

Enabled Enable USB Controller. (Default v alue)
Disabled Disable USB Controller.
GA-8IPE1000 Series Motherboard
Disable SATA controller.
When no dev ice is plugged in IDE1 or IDE2, SATA controller w ill remap to IDE
controller. (Default Value)
Set SATA Mode manually.
Remap SATA Port 0 to IDE Pri. Master.
Remap SATA Port 0 to IDE Pri. Slav e.
Remap SATA Port 0 to IDE Sec. Master.
Remap SATA Port 0 to IDE Sec. Slav e.
SATA controller set to SATA port0. As this mode, it support by WinXP or
later OS only . (Default v alue)
SATA controller set to SATA port1. As this mode, it support by WinXP or
later OS only .
- 46 -