Gigabyte GA-965P-DQ6 User Manual page 87

B. Delete Array:
To delete the array, select Delete RAID Disk Drive in the main menu and press ENTER. The selection
bar will move to the RAID Disk Drive List block. Press the SPACEBAR on the array to be deleted; a
small triangle will appear to mark the selected array (Figure 13). Press Del.
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.23
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: JRAID
[ ]-Select RAID
Press Y to confirm yes to the following message (Figure 14) or N to cancel.
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.23
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: JRAID
[ ]-Select RAID
Now, you can proceed to install the SATA controller driver and operating system.
[ Hard Disk Drive List ]
Mode Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level Capacity Status
0-Stripe 240 GB
[SPACE]-Mark Delete [DEL]-Confirm
Figure 13
[ Hard Disk Drive List ]
Mode Name
HDD0: ST3120026AS
HDD1: ST3120026AS
ALL DATA ON THE RAID WILL LOST!!
ARE YOU SURE TO DELETE (Y/N)? N
RAID Level Capacity Status
0-Stripe 240 GB
[SPACE]-Mark Delete [DEL]-Confirm
Figure 14
- 87 -
Capacity Type/Status
120 GB Inside
120 GB Inside
Members(HDDx)
Normal 01
[ESC]-Abort
Capacity Type/Status
120 GB Inside
120 GB Inside
Members(HDDx)
Normal 01
[ESC]-Abort
Appendix