Gigabyte GA-965P-DQ6 User Manual page 73

Step 3:
After entering the Create Volume Menu screen, name the disk array with 1~16 letters (letters cannot be
special characters) under the Name item. When finished, press ENTER to select a RAID level (Figure
5). There are four RAID levels: RAID0, RAID1, RAID10 and RAID5. Select a RAID level and press
ENTER.
Intel(R) Matrix Storage Manager option ROM V6.0.0.1022 ICH8R wRAID5
RAID0-
RAID1-
RAID10- Striped volume whose segments are RAID1 volumes. Requires
RAID5-
[ ]-Change
Step 4:
Set the stripe block size (Figure 6). The KB is the standard unit of stripe block size. The stripe block size
can be set from 4KB to 128KB. After the setting, press ENTER to set array capacity.
Intel(R) Matrix Storage Manager option ROM V6.0.0.1022 ICH8R wRAID5
[ ]-Change
Copyright(C) 2003-06 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.6 GB
Create Volume
[ HELP ]
Choose the RAID level best suited to your usage model.
Data striped across multiple physical drives for performance.
Data mirrored across multiple physical drives for redundancy.
four hard drives. Functionally equivalent to RAID0+1.
Data and parity striped across three or more physical drives
for performance and redundancy.
[TAB]-Next [ESC]-Previous Menu
Figure 5
Copyright(C) 2003-06 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.6 GB
Create Volume
[ HELP ]
The following are typical values:
RAID0 -
RAID10 -
RAID5 -
[TAB]-Next [ESC]-Previous Menu
Figure 6
- 73 -
[ENTER]-Select
128KB
64KB
64KB
[ENTER]-Select
Appendix