Gigabyte GA-M68M-S2 User Manual page 72

Am2+/am2 socket motherboard for amd phenom ii processor/ amd phenom processor/amd athlon ii processor/ amd athlon processor/amd sempron processor

Table of Contents

B. Installing Windows Vista

(The procedure below assumes that only one RAID array exists in your system.)

Step 1:

Restart your system to boot from the Windows Vista setup disk and perform standard OS installation

steps. When a screen similar to that below appears (RAID hard drive will not be detected at this stage),

select Load Driver (Figure 3).

Step 2:

Insert the motherboard driver disk into your system and browse to the following directory(for Windows

Vista 32-bit):

\BootDrv\UDA\WinVista\sataraid

For Windows Vista 64-bit, browse to the following directory:

\BootDrv\UDA\WinVista64\sataraid

Appendix

Figure 3

Figure 4

- 72 -

Table of Contents

Troubleshooting