Integrated Peripherals - Gigabyte GA-8SIMLH SERIES User Manual

Integrated Peripherals

CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are
IDE1 Conductor Cable
IDE2 Conductor Cable
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
AC97 Audio
Sy stem Share Memory Size
USB Controller
USB Legacy Support
On Board LAN Function *
Init Display First
Onboard Modem Function *
Onboard Serial Port A
Onboard Serial Port B
Serial Port B Mode
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
higf: Mov e Enter:Select +/-/PU/PD:Value
F5:Prev ious Values
C IDE1 Conductor Cable
8Auto
8ATA66/100/133
8ATA33
"*" For GA-8SIMLH-P only .
Integrated Peripherals
F6:Fail-Safe Defaults
Figure 4: Integrated Peripherals
Will be automatically detected by BIOS. (Default Value)
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE
dev ice and cable is compatible w ith ATA66/100/133).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE dev ice and
cable is compatible w ith ATA33).
- 39 -
[Auto] Item Help
Menu Lev el u
[Auto]
[Enabled] [Auto]
[Enabled] Auto-detect IDE
[Enabled] cable ty pe
[32MB]
[Enabled] [ATA66/100/133]
[Disabled] Set Conductor cable
[Enabled] to ATA66/100/133(80-pins)
[AGP]
[Disabled] [ATA33]
[3F8/IRQ4] Set Conductor cable
[2F8/IRQ3] to ATA33(40-pins)
[Normal]
[378/IRQ7]
[ECP]
EPP1.7
[3]
[201]
[330]
[10]
F10:Sav e ESC:Ex it F1:General Help
F7:Optimized Defaults
BIOS Setup