Speaker Connections; Speaker Installation - Denon AVR-1909 Owner's Manual

Speaker Connections

Speaker Installation

The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and
a monitor.
Subwoofer
Front speakers
Place the front speakers to the
sides of the monitor or screen and
as flush with the screen surface as
possible.
The table below shows a typical speaker configuration for the AVR-1909.
FRONT
CENTER
L R
7.1-channels
S S S
(FRONT A+B)
7.1-channels
S S S
6.1-channels
S S S
5.1-channels
S S S
3.1-channels
S S S
2.1-channels –
S S
2-channels –
S S
Center speaker
Surround back speakers
Surround speakers
SURROUND SURROUND BACK
SUBWOOFER
L R L R 1 speaker
–
S S S S
–
S S S S
– –
S S S
– – –
S S
– – – – –
– – – – –
– – – – –
Speaker Connections
Example: 5.1/7 .1-channels
Front speakers
Subwoofer
Subwoofer
with built-
in amplifier
(L)
w
b L : Left
R : Right
S
S
S
S
S
NOTE
S
For surround back speakers :
–
• Since "Amp Assign" of AVR-1909 is set to "ZONE2" by default, audio is not output from the surround
back speakers. When using the surround back speakers with MAIN ZONE, change the "Amp Assign"
setting to "7.1ch" (vpage 35).
• When using just one surround back speaker, connect it to the left channel (SBL).
For ZONE2 speakers :
• For multi-zone connection and operation, see "Amp Assign / Multi-zone Connections and Operations"
(vpage 69 ~ 72).
A
(R)
q w q
(L) (R)
w q w q
Surround speakers
ENGLISH ENGLISH
Center speaker
w q
(L) (R)
w q w q
Surround back
speakers
When surround back
speakers are connected
0 0