Sleep; Recall; Child Lock; Mode - Daewoo DTC Series Instruction Manual

SLEEP

By pressing the SLEEP button repeatedly, you can select one of the fol-
lowing setting:
->
0->30min. ->60min.->90min.->120min. 0
The set will turn off after time you select.
Automatic Switch-Off in No broadcast Signal
If a broadcasting signal is not present for about 30 minutes, the set will be
automatically turned off.
In AV mode, however, this function dose not operate.

RECALL

The RECALL button is used to display the current status: programme
number, station name and clock.
This display appear for 5 seconds unless any button is pressed.

CHILD LOCK

You can prevent the use of the TV set without the remote control.
The set is child-locked after switching off the set by pressing the TIME,

MODE,

, POWER button in sequence on the remote control within 5
seconds.
The child-lock function is indicated by flashing the STAND-BY INDICATOR.
The set can only be switched back on using the remote control.
Note that even though "WAKE UP TIME" is set to ACTIVATE : YES, TV
won't be turned on while "CHILD LOCK" function is working.
MODE
Pressing the MODE button on the remote control, the current system of the
set will be displayed on the screen.
Whenever you press the MODE button, the system will changed as fol-
lowing
AUTO PAL SEC N3 N4 N5
the red colour of OSD means that the colour system of TV set is in
"AUTO" mode.

OSD HALF TONE (MESH) FUNCTION

If you push the Recall key in menu, OSD SCREEN is toggled with OSD half
tone (mesh).
And then, menu is memoried at the last state.
16 : 9 FUNCTION
If you push "SKIP" key except "TEXT" and "EDIT" mode, picture is toggled
16:9 or 4:3.
7