Connecting Your Video To The Hi-Fi System (Option 2) - Daewoo PROline VR516 Operating Instructions Manual

Connecting your video through extra equipment
Connecting your video to the satellite system
Before you start, unplug all the equipment from the mains supply.
3
AC 230V
50 Hz
Make sure the satellite receiver is switched to Sky One.
Connecting your video to the hi-fi system - Option 1
Before you start, unplug all the equipment from the mains supply.
4
AC 230V
50 Hz
You can also use a scart lead to improve picture and sound quality from your video.
Connecting your video to the hi-fi system - Option 2
Before you start, unplug all the equipment from the mains supply.
5
AC 230V
50 Hz
Television
Video
Satellite
Television
Hi-Fi
Video
Television
Hi-Fi
Video
Aerial
You can use this connection
if your video has two scart
sockets. This will improve
sound and picture quality
when you are recording from
satellite.
To use this function, see
page 9.
Plug a phono cable into
Aerial
the 'Audio L/R' sockets
on the back panel and
into the audio sockets on
any audio amplifier, if
needed. If your video
does not have this
connection, see below
(Option 2).
Aerial
Plug a scart to phone
cable into the 'AV1'
socket on the back panel
and into the audio socket
on any audio amplifier, if
needed.
5