Connecting Up The Video Recorder, Connecting A Decoder - Daewoo ST441S Instruction Manual

DVST4L1S-PG 01.2.23 1:51 PM ˘ ` 4
I n i t i a l
INSTALLATION
The buttons to use
are marked on the
following pages.
4
Place your video
horizontally on a flat, steady base so that air can circulate around it for ventilation.
away from humidity and heat, magnetic fields, such as those from loudspeakers
etc., and with no heavy objects placed on top.
Fitting the remote control's batteries - page 22.
Connecting up the video recorder
Switch off all components when connecting or disconnecting cables.
AC 230 V~ ,
50 Hz
Unplug the aerial cable from your TV and plug it into the "ANT. IN"
socket of the video.
Plug the short coaxial cable provided into the "ANT.OUT" socket of
the video and the aerial socket of the TV.
Plug an EURO AV (SCART) cable into the "EURO AV1" socket of the
video and the AV socket on the TV .
This connection will provide best picture and sound quality.
Ask your dealer for an appropriate cable if you do not have one.
Make sure the rating of the household mains supply matches the rating shown on
the back of the video.
Now plug in the mains lead. The display of the video should now light.
ANT.OUT can only transmit the received signal from ANT.IN to the TV.
You can watch the A/V output of VCR only through the scart cable.
Connecting a decoder
ANT. IN
EURO AV2/ DECODER
ANT. OUT
EURO-AV
DECODER
decoder
EURO-AV
DECODER
With these connections you are able to:
watch and record a programme without
distortion,
record a programme while watching the
Pay-TV programme ( Canal+),
watch a programme while recording a
Pay-TV programme ( Canal+).
EURO AV2/ DECODER
ANT. OUT
EURO-AV
decoder and
satellite-receiver
EURO-AV DECODER
If you want to take advantage of the
ShowView timer programming with
the stations offered by your satellite
receiver, make the connections
following the diagram above.
See also pages 13, 16 and 17.
ANT. IN
ANT. IN
EURO AV2/ DECODER
ANT. OUT
EURO-AV
VCR
TV