Daewoo DTC Series Instruction Manual page 8

EDIT
1. Press the menu button to select INSTALL.
2. Press the y / x buttons and then INSTALL SYSTEM.
3. Select EDIT with the PR y / x buttons and press the C / B buttons to
start EDIT.
4. DELETE PROGRAM POSITION DATA.
Position the blue-line to the program to delete with the PR
buttons and the DELETE button.
5. CHANGING THE ORDER OF THE CHANNELS
Position the blue-line to a program to move with the PR y / x buttons and the MOVE button.
Press the PR y / x buttons to position the blue-line to another program to move.
By pressing the MOVE button again, selected two program will be moved.
6. ENTER A STATION NAME
Locate the cursor to below NAME with the C / B buttons.
Using the PR y / x buttons, select the desired letter, number or blank.
Press the B(right button) to select the next position.
7. SKIPPING THE CHANNELS
You can select SKIP with the SKIP button in EDIT mode or locate in the cursor to below SKIP
with the C / B buttons and then press the PR y / x buttons to skip the desired program.
A program marked with skip " " is skipped when changing channel using the program
UP / DOWN(on normal operation).
Press the NUMBER buttons 0~9 or the PR y / x buttons to select program number you want. The
screen will change according to the selected program number.
8. SELECT SOUND SYSTEM
When the sound is abnormal, press the MODE button on the remote controller. Select the correct
sound system.
y / x
7