Installation; After Moving The Set; Inserting Batteries Into The Remote Control Unit; Aerial Connection - Daewoo DTD-14D3 Instruction Manual

INSTALLATION

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the
ON/OFF button must be switched off for at least 15minutes in
order to take out a colour stain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover.
Insert the batteries supplied(two 1.5V, type AA).
Make sure that the polarity matches with the (+) and (-) marks
inside of the battery compartment.
Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial
installation is the most important.
If you are located in a relatively strong area, you will be able to
use the indoor aerial.
When using an outdoor aerial, it is usually connected to the set
by means of 75 ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with 100~250V AC,
50/60Hz.

FIRST INSTALLATION OF TV

If you turn on the TV firstly, LANGUAGE menu will be displayed.
Select the language you want with PR up/down button and press
MENU button on the Remote Controller.
Then blinking of PLEASE WAIT, searching programs, will not
stop until EDIT menu appears.
In EDIT menu, select the proper sound system with PR up/down,
LEFT/RIGHT button on the Remote Controller.
If undesirable pictures are searched, skip the channel.
Press MENU button 3 times if you finish the edit programs.