Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Daewoo DTS-42SP
Summary of Contents for Daewoo DTS-42SP
- Page 1 48586200E10G-R1...
- Page 2 PLASMA TELEVISION INSTRUCTION MANUAL PLASMA DISPLAY TV SPEAKER DTS-42SP DTS-HG10 DP-HG10 PLASMA DISPLAY TV DTS-HG20 WALL HANGER UNIT DP-HG20 DTS-HG22 DP-HG22 PLASMA DISPLAY TV DTS-42ST STAND...
-
Page 3: Plasma Television
INSTRUCTION MANUAL DTS-42SP PLASMA TELEVISION SPEAKER Thank you for purchasing the Daewoo Electronics Plasma Television Speakers. These speakers are specifically designed only for the Daewoo Plasma Television. To ensure the safe operation of the unit, please read these instructions before installing. - Page 4 TABLE OF CONTENTS 1. Check for enclosed parts ......2 2. Important Safety Instructions ...... 3 3. Assembly Instructions ......... 5 Using speakers when attached to the plasma display...
- Page 5 1. PLEASE CHECK THE FOLLOWING ITEMS SHOWN BELOW SPEAKER STAND(OPTION ) M5 SCREWS VIBRATION ABSORBENT SPONGE (16) SPECIAL SCREWS SPEAKER WIRES / ROUND HEAD SCREWS(OPTION) FIXED BRACKETS CLAMP WIRE...
-
Page 6: Important Safety Instructions
Do not use the speakers with other products. Do not alter or modify any parts These speakers are specifically manufactured to be used with the Daewoo Plasma display to enhance your listening pleasure. (Failing to do so may cause the unit to fall and break) - Page 7 PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INSTALLING OR HANDLING When assembling, be sure to use the enclosed Please be careful not to stain the speakers with parts and make sure all parts are tightly any gas or oil. screwed as instructed. (Failing to do so will cause the speakers to (Doing so will change the outer appearance) vibrate and unable to produce clear sound.)
-
Page 8: Assembling Instructions
3. ASSEMBLING INSTRUCTIONS USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS Clean the surface with soft, lint-free cloth Attach the sponge to the side of the where sponges will be attached. speaker that will be attached to the plasma display. - Page 9 INSTALLING SPEAKERS TO THE PLASMA DISPLAY Place a protective covering over the surface you will be working on and lay the plasma display as shown below. . Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto the fixed brackets to the squared holes in the back of the plasma display.
-
Page 10: Connecting Speaker Wires
CONNECTING SPEAKER WIRES Take the speaker wire(2) and use the red cord to connect to and fro (+) inputs, and use the black cord to connect to and fro (-) inputs. Note Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds. - Page 11 INSTALLING SPEAKERS TO ITS OWN STAND OR UNINSTALLING SPEAKERS FROM ITS OWN STAND(OPTION) INSTALLING SPEAKERS TO ITS OWN STAND.(OPTION) Please be sure to have the vibration absorbent sponge onto the side of Use a coin to secure the speaker where the the special screws stand will be attached.
Need help?
Do you have a question about the DTS-42SP and is the answer not in the manual?
Questions and answers