Your Refrigerator Needs Ventilation; Installation; Electrical Connection - AEG Santo K81240i Operating Instructions Manual

Your refrigerator needs ventilation

Integratable models (i-appliances)
The integrated door of the furniture
cabinet largely seals the installation
recess. i-appliances must therefore
be provided with ventilation by
having an opening in the furniture
plinth. The warmed air must be able
to be exhausted upwards through
the air shaft on the furniture back.
The ventilation cross-sections
should be at least 200 cm
Warning - In order not to impair
the function of the appliance, never cover or obstruct the ventilation
openings.

Installation

See installation instructions supplied.
Please check whether, after installing your appliance and especially
after rehingeing the door, the door seal seals right round. An untight
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also „What to do if...").

Electrical connection

0 1. Before initial start-up, refer to the appliance rating plate to ascertain if
supply voltage and current values correspond with those of the mains
at the installation location.
e.g.:
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply.
The supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electri-
cal installation must include suitable means of isolating the appliance
from the mains (e.g. fuse, cut-out, current trip or similar with a mini-
mum contact separation of 3 mm).
Attention: The mains connection cable may only be replaced by a
skilled electrician. Please contact your dealer or our customer service
department for repairs.
2
.
AC 220 ... 240 V 50 Hz or
220 ... 240 V~50 Hz
Installation
37