Delete Or Review An Event Timer; Tv Volume Punch-Through - RCA RCU807 Manual

RCU807US_IB_REVB 9/26/03
6. The Time Display Screen is shown. The cursor is flashing
under the hour (HH) digits. Press and release the
LEVEL + /UP ARROW or LEVEL - /DOWN ARROW key to
select the desired hour. Press and release the ENTER key.
7. The cursor under the minutes (MM) digits is now flashing.
Press and release the LEVEL + /UP ARROW or LEVEL-/
DOWN ARROW key to select the minutes. Press and release
the ENTER key.
8. The LCD shows the Success Screen.
9. Once the first Event Timer is set, the LCD displays the
Timer 2 Mode? Screen for setting the next Event Timer.
If you want to set another Event Timer, repeat steps 4-8.
If you do not want to set any more Event Timers, press
and release the SETUP (S) key repeatedly until the Exit
screen is displayed, then press and release the ENTER key.
The Set an Event process is now complete.
A symbol (T) will be displayed to signify a Timer is set.
Note:
The LCD display will remain on until the Timer expires.

Delete or Review an Event Timer

Any set Event Timer is indicated by the symbol (T) displayed above the clock
on your LCD display. To delete or review an Event Timer, follow these steps:
If no Event Timer has been previously set, this option is not shown in Setup Mode.
Note:
1. Press and hold the SETUP (S) key for 2-3 seconds
until the LCD display shows the Setup Mode? Screen.
2. Release the SETUP (S) key.
3. Press and release the SETUP (S) key repeatedly until the
Cancel X Screen is displayed (X=1, 2, 3, or 4 and corresponds
to the timer you wish to delete.).
4. To cancel this event, press and release the ENTER key.
The LCD displays the Success Screen.
If you wish to cancel the Timer deletion process, or
Note:
if you only wish to review a previously set Event Timer and
exit from Setup Mode, press and release the CLEAR key.
5. The display returns to either the Cancel X+1 Screen or,
if no more Event Timers have been programmed, to the
Learn Mode? Screen.
6. Deleting or reviewing an Event Timer is now complete.
To exit Setup Mode, press and release the SETUP (S)
repeatedly until the Exit Setup Screen is shown, then
press and release the ENTER key.

TV Volume Punch-through

Your RCU807's Volume Punch-through feature allows you to control the volume and mute
functions of your television without the need to place the RCU807 in TV mode. For example,
your TV volume can work even when you are in VCR Mode, because it "punches through"
from one component to another.
Specifically, the TV VOL + , VOL - and MUTE keys work even when you are in VCR, DVD,
CABLE, or SAT Modes. This feature is also available if one of the AUX keys is programmed
to control a second VCR, DVD, CABLE, or SAT component.
The LCD shows component changes for the Volume Punch-through keys if they are pressed
in other modes (e.g., If you are in CABLE Mode and you press and release the VOL + key,
TV is displayed in the LCD).
All CD/AUDIO Modes take any Volume/Mute keypress commands from the
Note:
CD/AUDIO code. All other components punch through to the TV Volume/Mute control.
10:18 Page 13
13