Master Reset; Rca All Power Off Feature - RCA RCU807 Manual

RCU807US_IB_REVB 9/26/03

Master Reset

A Master Reset returns the RCU807 back to the original factory settings. The Master Reset
clears all user-programmed codes, Learned commands, Event Timers and SmartMacros.
To perform a Master Reset, follow these steps:
1. Press and hold the SETUP (S) key for 2-3 seconds
until the LCD display shows the Setup Mode? Screen.
2. Release the SETUP (S) key.
3. Press and release the SETUP (S) key repeatedly
until the Reset Screen appears.
4. Press and release the ENTER key.
5. The LCD displays the Confirm? Screen. Press and release
the ENTER key. The Wait Screen appears while entries
are being cleared and the LCD returns to the normal
time display.
If at this point, you wish to cancel the
Note:
Master Reset operation, press and release the CLEAR key.
6. All settings are now reset to the factory default.

RCA All Power Off Feature

The RCA All Power Off feature is available in all normal operating modes. If the ON•OFF
key is pressed twice consecutively (within two seconds), all RCA equipment is turned off.
The LCD shows the All Off Screen while this routine is active.
10:18 Page 15
15