Setting Bake - Frigidaire 318205325 Use And Care Manual

setting oven controls

SETTING BAKE

The BAKE pad controls normal baking. The oven can be
programmed to bake at any temperature from 170°F to
550°F.
Baking tips:
• Preheat your oven before using the bake mode.
• During preheat, the 2 elements and the convection fan
are used in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as pos-
sible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2" to 4" (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
to set the controls for Baking:
1. Press BAKE. "— — —" appears in the display.
2. Within 5 seconds, press the
will show "350°F (177°C)". By pressing and holding
the or , the temperature can then be adjusted
in 5°F increments (1°C if the control is set to display
Celsius).
3. 7 seconds after the
oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the preheat indicator light will
turn OFF and the control will beep.
10
or . The display
or pad is released, the

note
Pressing cancel will stop the feature at any time.
To Change the Oven Temperature after Baking has
started:
1. Press BAKE.
2. Press the or
set temperature.
pad to increase or decrease the