AEG SANTO K 9 88 00-4 i Operating And Installation Manual page 20

What to do if ...
Appliance does not work.
Appliance cools too much.
The food is too warm.
Temperature display shows
a square.
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
20
Symptom Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Temperature is set too
cold.
Temperature is not proper-
ly adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
There is a function fault.
Light bulb is defective.
Door seal is not air tight
(possibly after reversing
the door).
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Press „+" (WARMER)
button.
Please look in the "Starting
up and Temperature regu-
lation" section.
Open the door only as long
as necessary.
Turn the temperature
regulator to a colder set-
ting temporarily.
Please look in the
"Installation location" section.
Please inform your local
Service Force Centre. Do
not open the door of the
appliance again.
Please look in the "Changing
the light bulb" section.
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.