Click on OK.
4.
The Install From Disk screen opens, as illustrated in
Figure 3-3.
Install From Disk screen
Insert the NETGEAR XM128 Driver Disk in the floppy drive.
5.
As instructed on the Install From Disk screen, type A:\ to find the driver disk.
6.
Click on OK.
7.
The Select Device screen opens, as illustrated in
Figure 3-4.
Select Device screen
Installation
Getting Started Using FirstGear for the Model XM128S ISDN Digital Modem
Figure
3-3.
Figure
3-4.
3-5