Blackberry 7520 Welcome Manual page 11

Nextel® Welcome Guide
4. If the battery is inserted, remove it by pushing up with your thumb
from the bottom of the battery.
5. Slide the SIM card holder toward its hinge to unlock it.
6. Lift the SIM card holder.
7. Insert the SIM card into the holder so that the notches align.
8. Close the SIM card holder.
9. Slide the SIM card holder away from its hinges to lock it.
Step 2: Insert the Battery
Important: Your kit may contain a charged battery. If you need to charge your
battery, connect the end of the USB cable to your computer and
the small end to your BlackBerry device or use your travel
charger. To charge your BlackBerry device using your computer,
the BlackBerry Desktop Software must be installed on your
computer. Use only the battery that Research in Motion
specifies for use with your BlackBerry device. See the Safety and
Product Information booklet that accompanied your BlackBerry
device for more information about using the battery safely.
1. Press the battery cover release button and slide off the battery
cover.
2. Insert the battery so that the connectors on the battery align with the
connectors on your BlackBerry device.
3. Replace the battery cover.
4. If the battery is charged, your BlackBerry
device will turn on and the Confirm Date/
Time dialog box appears.
You will see an hour glass for a minute or so
followed by the Nextel screen and then a dialog
box that lets you know that Security software is
being verified.
4
nextel.com
®