Wlan Wizard - Nokia N79 User Manual

Connections
point. The active WLAN connection ends when you
end the data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one
WLAN access point device at a time, but several
applications can use the same internet access point.
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the standby mode.

WLAN wizard

The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example,
network found is displayed, to create an internet
access point (IAP) and start the web browser using
44
this IAP, select the status and
browsing.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
create a new access point for a hidden WLAN, select
New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and
end the connection in the WLAN, select the status
and Disconnect
If WLAN scanning is off and you are not connected
to any WLAN,
set scanning on and search for available WLANs,
select the status and press the scroll key.
To start a search for available WLANs, select the
status and
off, select the status and select
off.
To access the WLAN wizard application in the menu,
WLAN
press , and select
Start Web
Continue Web
WLAN.
WLAN scanning off is displayed. To
Search for WLAN. To set WLAN scanning
WLAN scanning
Tools WLAN
>
browsing. To
wiz..