Installing Software - Creative Graphics Blaster RIVA TNT2 Value Installation Manual

Installing Software

To install in
Windows 95
(Retail version)
6 Graphics Blaster RIVA TNT2 Value Installation Guide
After installing the graphics card, you can install the software. The Graphics Blaster RIVA
TNT2 Value CD contains the following:
Drivers for Windows 95/98 (common to both)
Drivers for Windows NT 4.0
Creative Enhanced BlasterControl
Creative SoftMPEG for Windows 95/98
®
Sonnetech Colorific /3Deep
This section is organized as follows:
To install in Windows 95 (Retail version)
To install in Windows 95 (OSR version 2.0 and later)
To install in Windows 98
To install in Windows NT 4.0 (Service Pack 3)
1. Switch on your system.
Windows 95 automatically detects the
graphics card.
A New Hardware Found message box
appears, informing you that a display
adapter has been detected.
2. When a dialog box similar to Figure 5
appears, ensure that the Driver from disk
provided by hardware manufacturer
option is selected.
3. Click the OK button.
4. Insert the Graphics Blaster RIVA TNT2
Value CD into your CD-ROM drive.
™
for Windows 95/98 and Windows NT 4.0
™
for Windows 95/98 and Windows NT 4.0
Figure 5: Selecting the Driver from disk provided by
hardware manufacturer option.