Changing Settings - Creative Graphics Blaster RIVA TNT2 Value Installation Manual

Changing Settings

To change the
display settings in
Windows NT 4.0
10 Graphics Blaster RIVA TNT2 Value Installation Guide
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab.
3. In the Desktop Area group box, move the slider to set the desired resolution.
4. In the Color Palette group box, select the desired color. Certain colors may not be available
for some display resolutions.
5. In the Refresh Frequency group box, select the desired refresh rate.
6. To test the settings, click the Test button, and then click the OK button.
When the Testing Mode dialog box re-appears:
• If the test bitmap is properly displayed, click the Yes button.
• If not, click the No button. A warning message will be displayed. Click the OK button
and repeat steps 3 through 6, changing one or more of the settings.
7. Click the OK button to close the Display Properties dialog box.