Setting The Relays & Presets - Omega DPF78 SERIES User Manual

PRESS
PRGM
STEP PRGM
5
PRGM
SETTING
THE
PRGM
RELAYS
PRGM
This step will only
appear on DPF75
ENTER
ENTER
This step will only
appear on DPF75
ENTER
ENTER
SETTING
THE
PRE A
PRESETS
PRE B
DISPLAY
factor
count
rate
loc
relay
This section sets up the relay information.
a tot
Press the PRGM key to choose A TOT (A
or assigned to total) or A RATE (A assigned to
a rate
rate). Press ENTER when the desired choice
is displayed.
This is the duration (.1 to 99.9 sec) that relay
A ##.#
A will remain energized. If 00.0 is selected,
the relay will latch until reset.
b tot
Press the PRGM key to choose B TOT (B
or assigned to total) or B RATE (B assigned to
b rate
rate). Press ENTER when the desired choice
is displayed.
This is the duration (.1 to 99.9 sec) that relay
b ##.#
B will remain energized. If 00.0 is selected,
the relay will latch until reset.
PRE A
PRE A = Preset A (Final Preset); The set point
Followed by at which output A will trigger. If the displayed
last PRE A value is not the desired preset, press the
entered key(s) under the digit to be changed.
PRE B
PRE B = Preset B (Prewarn); The set point at
Followed by which output B will trigger. If the displayed
last PRE A value is not the desired preset, press the
entered key(s) under the digit to be changed.
14
REMARKS