Programming Procedure; Setting Scaling Factors - Omega DPF78 SERIES User Manual

PRESS
STEP
1
SETTING
PRGM
SCALING
FACTORS
ENTER
ENTER
THIS SECTION
WILL ONLY
APPEAR IN THE
ENTER
RATE METER
ONLY VERSION
(DPF78)
ENTER
ENTER
PROGRAMMING
DISPLAY
This section of the menu is used to set
factor
up the scaling factors for inputs A & B.
This sets the decimal for factor A.
dp f a
Press the arrow key under the digit
where the decimal is desired. To clear
the decimal, press the arrow key fur-
thest to the right (PRGM) .
This is the scaling factor for input A. To
change, press the arrow key under the
#####
digit(s) to change. Press ENTER to
enter the displayed value.
This section will only appear in the
hi cps
RATE only version. Press the PRGM
key to choose HIGH CPS (0-9.99KHz)
or
lo cps
or LOW CPS (0-40Hz). Press the
ENTER key to enter the displayed
choice.
This sets the decimal for factor B.
dp f b
Press the arrow key under the digit
where the decimal is desired. To clear
the decimal, press the arrow key fur-
thest to the right (PRGM) .
This is the scaling factor for input B. To
change, press the arrow key under the
#####
digit(s) to change. Press ENTER to
enter the displayed value.
10
REMARKS