Setting The Rate - Omega DPF78 SERIES User Manual

PRESS
STEP
3
PRGM
SETTING
THE RATE
PRGM
DPF75
PRGM
&
DPF78
ONLY
ENTER
ENTER
ENTER
ENTER
ENTER
DISPLAY
factor
count
rate
This section of the menu is used to set up the
rate information.
rps
Press the PRGM key to choose RPS (rate per
or second) or SCALE (RPM, RPH). Press ENTER
scale
to enter displayed choice.
z 60
Press PRGM to choose ÷60 (RPM) or ÷3600
or (RPH). Press ENTER to enter displayed choice.
z 3600
This sets the normalizing (averaging) factor.
nor ##
Press the arrow keys under the desired digits to
change. Press ENTER to enter displayed value.
This sets the number of significant figures to be
figur #
displayed. Press the arrow key under the digit to
change. Press ENTER to enter displayed value.
This sets the delay time (0.0 to 9.9) that the unit
will "look" for valid input data before the display
dly #.#
falls to 0. Press the arrow key under the digits to
change. Press ENTER to enter displayed value.
12
REMARKS