Connecting To Power; Installing Batteries; In The System; In The Remote Control - Optimus SYSTEM 746 Owner's Manual

13-1294.fm Page 8 Wednesday, July 14, 1999 7:01 PM
CONNECTING TO
POWER
After you complete all connections,
plug the system's power cord into a
standard AC outlet.
lights and AM 12:00
display.
Warning: To prevent electric shock,
the power cord plug's blades are po-
larized and fit a polarized AC outlet
only one way. If you have difficulty in-
serting the plug, do not force it. Turn it
over and reinsert it.

INSTALLING BATTERIES

In the System

Cautions:
• Always use fresh batteries of the
required size and recommended
type.
• Never leave dead or weak batter-
ies in the system or remote con-
trol. Batteries can leak chemicals
that can corrode the control.
• Do not mix old and new batteries,
different types of batteries (stan-
dard, alkaline, or rechargeable),
or rechargeable batteries of differ-
ent capacities.
To retain any preset radio stations
during an AC power loss, install two
alkaline AA batteries (such as Cat.
No. 23-557) into the system's battery
compartment.
8
STANDBY
appears on the

In the Remote Control

The remote control requires two AAA
batteries (not supplied) for power. We
recommend alkaline batteries, such
as RadioShack Cat. No. 23-555 for
the best performance and longest life.
1. Press in on the battery compart-
ment cover and push in the direc-
tion of the arrow, and lift off the
cover.
illustration
2. Put two AA batteries in the com-
partment as indicated by the po-
larity symbols (+ and –) marked
inside.
3. Replace the cover.
1. Press the tab in the direction of
the arrow and lift off the battery
compartment cover.
illustration