Reviewing The Programmed Sequence; Erasing The Programmed Sequence; Cd Care Tips - Optimus SYSTEM 746 Owner's Manual

13-1294.fm Page 21 Wednesday, July 14, 1999 7:01 PM
8. Programmed play automatically
stops at the end of the last pro-
grammed track. To stop the CD
player at any time during pro-
grammed play, press
CD's total number of tracks and
playing time appear.
Note: To replace a programmed track,
press
PROGRAM/MEMORY
on the remote control) until the posi-
tion number of the track you want to
replace appears. Then repeat Steps 3
and 4 to select and store the new
track.
Reviewing the Programmed
Sequence
While play is stopped, repeatedly
press /
PROGRAM MEMORY
on he remote control
t
programmed sequence.
Erasing the Programmed
Sequence
You can do either of the following to
erase a programmed sequence:
• Press
PROGRAM/MEMORY
on the remote control) then
PROG
before or after pro-
STOP
grammed play.
• Press before or after pro-
OPEN
grammed play.

CD CARE TIPS

Even though a compact disc is very
durable, treat the CD surface with
. The
STOP
care. We recommend the following
precautions:
(or
PROG
(or
PROG
to review the
)
(or
• Do not place anything but a CD in
the disc tray. This can damage the
drive mechanism.
• Do not write on either side of the
CD, particularly the non-label side
(signals are read from the non-la-
bel side).
• Do not store CDs
temperature, high-humidity loca-
tions. The CDs might warp.
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam's focus.
• Always handle a CD by the edges
to avoid fingerprints and always
keep it in its protective case or
sleeve when not in use. Finger-
prints and scratches on the CD's
surface can prevent the laser
beam from correctly reading the
digital information. To clean the
CD surface, use a CD cleaner kit
(such as Cat. No. 42-225). If the
CD gets scratched, use Scratch 'n
Fix (RadioShack Cat. No. 42-
127).
in high-
21