Recording From A Cd - Optimus SYSTEM 746 Owner's Manual

13-1294.fm Page 24 Wednesday, July 14, 1999 7:01 PM
4. Select the desired band and sta-
tion, then press
start recording.
records until it reaches the end of
the side, then the cassette deck
automatically stops.
Notes:
• To temporarily stop recording,
press . Press
sume recording.
• If you record broadcasts from
AM radio, you might hear a low-
volume hum when you play
back the recording. If this oc-
curs, set
BEAT
the system to the other position
and try again.
illustration
Beat switch
location
5. To stop recording before it auto-
matically stops, press
deck.
24
to release it and
The cassette
again to re-
on the back of
on the

Recording from a CD

1. Load a blank cassette tape, or
one you want to record over.
2. Press then
and lock down.
3. Slide to
FUNCTION
4. Load the desired CD in the CD
player.
5. Select the desired CD track or
program a sequence (if you do not
want to record the entire CD in or-
der).
Note: To copy a CD's tracks in
random sequence, press
so
DOM RANDOM
6. Press both on the deck and
y
PLAY/PAUSE
player.
Notes:
• To briefly stop the tape while re-
cording, press
cording, press
• To listen to the CD during re-
cording, adjust the volume and
for the desired sound
E-BASS
7. Recording stops
when the tape reaches its end. To
stop the tape at any time during
recording, press
Note: To stop the CD at any time
during recording, press
CD's number of tracks and total
play time appear.
(Record). , ,
.
CD
RAN-
appears.
on the CD
. To resume re-
again.
.
automatically
.
. The
STOP