Encryption And Integrity Parameters; Sqlnet.encryption_Server Parameter Attributes - Oracle Database B10772-01 Administrator's Manual

Data Encryption and Integrity Parameters
Table A–1 Algorithm Type Selection
Encryption Selected? Integrity Selected?
No
There are three classes of parameters used to enable data encryption and integrity.
The first two classes listed here are required and the third (seeding the random key
generator) is optional:

Encryption and Integrity Parameters

The following sections summarize data encryption and integrity parameters:
SQLNET.ENCRYPTION_SERVER
This parameter specifies the desired encryption behavior when a client or a server
acting as a client connects to this server. The behavior of the server partially
depends on the SQLNET.ENCRYPTION_CLIENT setting at the other end of the
connection.
Table A–2 SQLNET.ENCRYPTION_SERVER Parameter Attributes
Attribute
Syntax
Valid Values
Default Setting
SQLNET.ENCRYPTION_CLIENT
This parameter specifies the desired encryption behavior when this client or server
acting as a client connects to a server. The behavior of the client partially depends
A-4 Oracle Database Advanced Security Administrator's Guide
No
Encryption and Integrity Parameters
Seeding the Random Key Generator (Optional)
See Also:
Chapter 3, "Configuring Network Data Encryption and
Integrity for Oracle Servers and Clients"
"About Activating Encryption and Integrity"
Description
SQLNET.ENCRYPTION_SERVER = valid_value
ACCEPTED, REJECTED, REQUESTED, REQUIRED
ACCEPTED
on page 3-6