Indoor Fan Motor Operation - Panasonic CS-E18CKE Service Manual

Table of Contents

Values of T1, T2, and T3 depend on remote control setting temperature, as shown in below table. After the adjustment of T1, T2

and T3 values, the operation mode for that particular environment and remote control setting is judged and performed, based on

the above operation mode chart, every 30 minutes.

Remote Control Setting Temperature (°C)

There is a temperature shifting on T1, T2, and T3 if the operation mode judged is changed from Cooling/Soft Dry to Heating or vice

verse.

Operation Mode change from

Cooling/Soft Dry → Heating

Heating → Cooling/Soft Dry

Example of operation mode chart adjustment:

From the above table, if remote control setting temperature = 25,

T1 = 25 + 7 = 32; T2 = 25 + 6 = 31; T3 = 25 - 7 = 18

The operation mode chart for this example is as shown in below figure and the operation mode to be performed will depend on

indoor intake air temperature and outdoor air temperature at the time when the judgment is made.

8.1.7.