Table of Contents
Advertisement
[MIC LEVEL]
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
≥ Change the mode to
≥ Set the iA/MANUAL/FOCUS switch to manual mode. (l 63)
1
Select the menu.
: [RECORD SETUP] # [MIC LEVEL] # desired setting
MENU
[AUTO]:
[SETr
]/[SET]:
2
(When [SETr
Adjust the microphone input level
using the cursor button right or left.
≥ Select
using the cursor button and press
the cursor button in the center to activate/
disactivate AGC. When AGC is activated, the
icon is surrounded by yellow and the amount
of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the
last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3
Select [ENTER] using the cursor button and press the button in the center to
determine the microphone input level, then select [EXIT] and press the
button in the center.
(Microphone input level meter) is displayed on the screen.
≥
≥ When changing to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the microphones.
≥ You cannot record with the audio completely muted.
.
AGC is activated, and the recording level is adjusted
automatically.
The desired recording level can be set.
]/[SET] is selected)
A Left
B Right
C Microphone input level
57
VQT3Q78
Advertisement
Table of Contents
