Table of Contents
Advertisement
[ZEBRA]
Parts where white saturation (color saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥ Change the mode to
≥ Set the iA/MANUAL/FOCUS switch to manual mode.
(l 63)
: [RECORD SETUP] # [ZEBRA] # [ON]
MENU
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain)
(l 65).
≥ The zebra pattern does not appear on the images actually recorded.
[LUMINANCE]
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 65)
≥ Change the mode to
≥ Set the iA/MANUAL/FOCUS switch to manual mode. (l 63)
: [RECORD SETUP] # [LUMINANCE] # desired setting
MENU
[OFF]:
Cancel the setting.
[ALWAYS]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 65)
A Luminance display frame
B Luminance level
≥ Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥ Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
or
.
or
.
A Zebra pattern
50%
VQT3Q78
59
Advertisement
Table of Contents
