Table of Contents
Advertisement
Messages
(continued)
Memory card
Indication
NO CARD!
INITIALIZING...
NOT REMOVE CARD.
SAVING...
NOT REMOVE CARD.
LOADING...
NOT REMOVE CARD.
COMPLETE.
WRITE PROTECTED!
OVER 99FILES!
INSUFFICIENT
CAPACITY!
LOAD FILE
IMCOMPATIBLE!
z A number is displayed instead of "#"
Description
No card is inserted.
Initializing.
Saving data to the memory card.
Do not remove the memory card.
Reading data from the memory card.
Do not remove the memory card.
Initializing, saving, or loading is
completed.
The memory card is write protected.
Saving is not possible because
there are already 99 files.
Saving is not possible because
there is insufficient free space in the
memory card.
A file cannot be read by the unit
or selected remote camera. The
following files are incompatible.
z A file saved with a different model
than the currently selected remote
camera.
z A file containing corrupted data
IP connection settings
Indication
Unavailable
network setting.
7. IP ADDRESS
IP Duplicate!
#. CAM###
IP Duplicate!
1. IP: SW
IP Duplicate!
Please reboot
AW-RP120
z A number is displayed instead of "#"
Description
The entered IP address, default
gateway, subnet mask, or port
number cannot be set.
Enter a correct value.
⇒ "Network settings of the unit" in
Basics (page 27)
The entered IP address is a
duplicate of a connection destination
IP address set for a camera number
or switcher.
The entered IP address is a
duplicate of either the IP address of
the unit or a connection destination
IP address for another camera
number or the switcher.
The entered IP address is a
duplicate of either the IP address of
the unit or a connection destination
IP address set for a camera number.
The unit needs to be rebooted.
Turn the unit's power off and then
back on.
57
Advertisement
Table of Contents
