Upgrading Memory
3
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
4
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
(Optional)
Memory
Compartment Cover
Fixing Screw
Memory Slot
If there is a protective memory cover
Loosen the fixing screw to remove the protective cover and
insert the memory module.
Protective Memory Cover
5
Push the memory module down so that it is completely fixed.
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
Memory Module Latches
Chapter 4.
97
Settings and Upgrade