Samsung ME32B User Manual page 142

7
Network
Automatic Network Settings
Use the Automatic
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1
Go to the Network Settings
2
Select Wired, press [
3
The network test screen appears and verifies the network connection. When the connection has
been verified, the "Internet is connected successfully." message appears.
If the connection process fails, check the LAN port connection.
If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, Manual Network Setup.
Manual Network Settings
Use the Manual
address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1
Go to the Network Settings
2
Select Wired, press [
verification process starts.
3
Press [ ]. The verification process stops. Select
IP Settings
4
Select the field at the top, press [
5
Press the
6
Enter the first portion of the
keys on your remote. Press the right arrow button to go to the next field.
7
Enter the next portion of the
8
Repeat the entry process for each field in the
Network Settings when connecting your product to a network that supports DHCP.
screen.
], and then press [
Network Settings when connecting your product to a network that requires a Static IP
screen.
], and then press [
screen appears.
], and then set
button on your remote to go to the
IP Address
IP Address. Press the right arrow button to go to the next field.
] again.
] again. The network test screen appears and the
IP Settings on network connection screen. The
IP Mode to Manual.
IP Address entry field, and then press [
(for example, 105) into the first entry field using the number
IP Address.
].
142
7 Network