Sanyo DC-TS750 Instruction Manual page 20

Hide thumbs Also See for DC-TS750:
Table of Contents

Advertisement

Setting audio
The sound from speakers can reach the listening position at different times
depending on the speaker placements. You can allow for this difference
by changing the delay time of the centre and surround speakers.
You also can change the dynamic range control (DRC).
1. Press the SETUP button in the stop mode. The setup screen appears.
2. Press the a button to select "Audio", then press the ENTER button.
"Audio" screen appears.
Example:
Audio DRC
Center Delay
Surr. Delay
3. Press the ENTER button to select "Audio DRC". The submenu ("On"
and "Off") appears.
4. Press the 5 or 4 button to select "On" or "Off" as desired.
On: It will compress the dynamic range. It may have no effect with
some discs.
Off: Sound with a wide dynamic range.
5. Press the ENTER button. "Audio DRC: On" or "Audio DRC: Off"
remains.
6. Press the 5 button to select "Center Delay", then press the ENTER
button. The submenu ("0ms", "1ms", "2ms", "3ms", "4ms" and "5 ms")
appears.
7. Press the 5 or 4 button to select the centre speaker delay time.
Centre speaker delay time
If D1
D2, set the delay time to "0ms".
If D1>D2, set the delay time as follows:
Difference between D1 and D2
Approx. 30cm
Approx. 60cm
Approx. 90cm
Approx. 120cm
Approx. 150cm
Centre speaker
Front left speaker
D1
D3
Surround left
speaker
D1: The distance from the front speaker
D2: The distance from the centre speaker
D3: The distance from the surround speaker.
8. Press the ENTER button. "Center Delay" and the selected delay time
remain.
9. Press the 5 button to select "Surr. Delay", then press the ENTER
button. The submenu ("0ms", "5ms", "10ms" and "15ms") appears.
10. Press the 5 or 4 button to select the surround speaker delay time.
Surround speaker delay time
If D1
D3, set the delay time to "0ms".
If D1>D3, set the delay time as follows:
Difference between D1 and D3
Approx. 150cm
Approx. 300cm
Approx. 450cm
11. Press the ENTER button. "Surr. Delay" and the selected delay time
remain.
12. Press the 4 button to skip back to the setup screen (or press the
SETUP button).
19
Off
0ms
5ms
Delay time
1ms
2ms
3ms
4ms
5ms
Front right speaker
D2
D1
D3
Surround right
speaker
Delay time
5ms
10ms
15ms
Setting parental
1. Press the SETUP button in the stop mode. The setup screen appears.
2. Press the a button to select "Parental", then press the ENTER button.
"Parental" screen appears.
3. Press the 5 button to skip "Password: ----" and select "Level".
Password
Level
4. Press the ENTER button repeatedly to select the parental lock level
("Level: Off, 1 ~ 8").
5. Press the 4 button to return to "Password: ----".
6. Enter a number in 4 digits, then press the ENTER button. The
password is now set.
Password
Level
Note:
If you do not set it, Parental control does not work, and it returns to the
initial settings.
7. Press the SETUP button. The setup screen disappears.
Parental control
MPAA (Motion Picture Association of America) guideline is a rating
system that provides advanced cautionary information to parents about
the content of movie programmes.
The parental lock level is equivalent to the following MPAA rating system.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG13 (Parental guidance cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
Some DVD discs contain a restriction level which enables parents to
prevent playback of discs by children. This unit is equipped with a
password designed to prevent children changing the level.
You cannot play DVD discs rated higher than the level you selected unless
you cancel the parental lock function.
For example, when you select level "5", the unit will not play discs with
ratings of "6", "7" or "8". The information will appear on the TV screen.
If you forget the password...
Enter "788444" even if 4 digits "----" appears, then press the ENTER button
to clear the current password. Enter a new password and set the parental
lock level again.
Note:
DVD discs may or may not respond to the parental lock settings. Make
sure this function works with your DVD discs.
----
Off
----
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents