Initial Settings - Sanyo DC-TS750 Instruction Manual

Once the initial settings have been completed, the unit can always be
operated under the same conditions.
The settings will be retained in the memory until they are changed, even
if the power is turned off.
Setting language
1. Press the SETUP button in the stop mode. The setup screen appears
and "Language" is highlighted.
2. Press the ENTER button. "Language" screen appears.
3. Press the 5 or 4 button to select the item (highlighted).
Example:
OSD
Audio
Subtitle
DVD Menu
4. Press the ENTER button. The submenu appears.
Example:
OSD
Audio
Subtitle
DVD Menu
5. Press the 5 or 4 button to select the language (highlighted).
6. Press the ENTER button. The selected language remains.
7. Repeat steps 3 - 6 for other items.
Note:
If "Others" is selected, enter the language code. (See "LANGUAGE
CODE LIST" on page 20.)
8. Press the 4 button to skip back to the setup screen (or press the
SETUP button to quit the setup screen).
Note:
- You cannot switch audio sound track languages if there is only one
language recorded on the disc.
- When you play a DVD disc, the unit automatically displays the pre-
selected subtitle language if it is included on the disc.
- For improvement, on-screen displays subject to change without
notice.

INITIAL SETTINGS

English
Disc
Disc
Disc
English
English Español
Disc Français
Disc Deutsch
Disc Portugues
Setting display
1. Press the SETUP button in the stop mode. The setup screen appears.
2. Press the a button to select "Display", then press the ENTER button.
"Display" screen appears.
3. Press the 5 or 4 button to select the item (highlighted), then press the
ENTER button. The submenu appears.
Example:
TV Type
NTSC Disc
4. Press the 5 or 4 button to select the submenu (highlighted).
Example: To select "TV Type: 4:3 PS"
TV Type
NTSC Disc
5. Press the ENTER button. (In this example, "TV Type: 4:3 PS"
remains.)
6. Repeat steps 3 - 5 for other items.
7. Press the 4 button to skip back to the setup screen (or press the
SETUP button).
TV Type:
4:3 LB (Letterbox):
Select when a conventional TV set is
connected. When the wide screen disc is
played back, the black bands appear at
the top and bottom of screen.
4:3 PS (Panscan):
Select when a conventional TV set is
connected. When the wide screen disc is
played back, it displays pictures cropped
to fill your TV screen. The left and right
edges are cut off.
16:9 :
Select when a wide screen TV set is
connected. Played in "FULL" size. (Setting
the wide screen TV to "FULL" mode is also
necessary.)
Note:
- The screen size may differ depending on the DVD discs.
- If you select 16:9 to get rid of the black bands on screen when wide
screen disc is played back, picture may be slightly distorted.
- In some discs, even if 4:3 PS is selected, the black bands may remain
on the screen.
NTSC Disc:
Select the video output signal format to "PAL60" or "NTSC" when playing
back the NTSC discs.
4:3 LB 4:3 LB
PAL60 4:3 PS
16:9
4:3 LB 4:3 LB
PAL60 4:3 PS
16:9
Cut off
18