Advertisement
VCC-6975P rear panel
VCC-6975P
CURSOR
LENS
SET
LENS 4-pin
(Unit: mm)
MODEL
VCC-6975P
Scanning system
PAL standard 625 lines, 25 frames/sec.
Image sensor
1/3" (approx. 4.8 mm x 3.6 mm) interline transfer method CCD
Picture elements
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
Horizontal resolution
480 TV lines
Approx. 0.05 Lux (F1.2, x32 electronic sensitivity)
Minimum illumination
Approx. 1.4 Lux (F1.2, normal mode)
ON / OFF ––– (on screen)
Electronic sensitivity
ON = x2 / x4 / x8 / x16 / x32 ––– (on screen)
Video output level
1.0 V (p-p) (75 ohms, composite)
Video S/N ratio
More than 48 dB
Multi-zone light measuring system
Backlight compensation
ON / OFF ––– (on screen)
ON = Multi-spot photometry / 5-section photometry ––– (on screen)
White balance
(TTL) ATW / AWC / Manual ––– (on screen)
Gain control
ON (Automatic) / OFF ––– (on screen)
Gamma
ON ( = 0.45) / OFF ––– (on screen)
Short mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. ––– (on screen)
Electronic shutter
Long mode: 2/50, 4/50, 8/50, 16/50, 32/50 sec. ––– (on screen)
Light control
Optical auto iris lens / Electronic iris (indoor use)
Lens mount
CS / C mount (C mount: using C-mount adaptor supplied)
Flange back
12.5 mm 0.5 mm adjustment
Auto iris lens
DC / VIDEO ––– Slide SW (side)
DC: Drive coil (+, -), Brake (Damp) coil (+, -)
Auto iris output
VIDEO: +12 V DC (Max. 50 mA), Video output (high-impedance)
Lens iris level
LEVEL: L~H ––– (on screen)
Electronic iris
ON / OFF ––– (on screen)
Electronic iris range
1.4 Lux to 70,000 Lux (F1.2), 2.0 Lux to 100,000 Lux (F1.4)
Internal sync. / Line lock ––– (on screen)
Synchronizing system
External sync.
V phase adjustment
LINE PHASE ––– (on screen)
ON / OFF ––– (on screen)
Motion detector
Alarm out: RS485 (G, B, A) and ALARM (C, A)
ON / OFF ––– (on screen)
Electronic zoom
ON = Continuance (up to x8), Fix (x2 / x4 / x8), Pan / tilt operation
Mirror image effect
H, V, H/V, 3 mode reverse image
Camera ID
ON (up to 8 characters) / OFF ––– (on screen)
Video signal
VIDEO OUT ––– BNC (rear)
Y/C signal out mini-DIN 4-pin (rear)
SSP (RS-485)
RS485 (G, B, A) ––– Pushbutton terminal x 1 pair (rear)
Sockets
Alarm signal
ALARM (C, A) ––– Pushbutton terminal x 1 pair (rear)
External sync.
VBS IN ––– BNC (rear)
Auto iris lens
LENS ––– 4-pin (side)
Power supply
24 V AC, GND ––– 3-pin terminal (rear)
Environmental conditions
Temperature: -10 C to 50 C [14 F to 122 F], Humidity: within 90% RH
Power requirement
24 V AC, 50 Hz or 12 V DC
Power consumption (approx.)
24 V AC: 4.0 W (with auto iris lens), 12 V DC: 4.1 W (with auto iris lens)
Camera mount
1/4"–20 UNC (top / bottom selectable)
67(W) x 54(H) x 126.5(D) mm
Dimensions (approx.)
[2.64(W) x 2.13(H) x 4.98(D) in.] (w/o camera & lens mounts)
Weight (approx.)
470 g [16.6 oz.] (w/o lens)
*Caution:
*Caution:
*Caution:
please consult the instruction manual to ensure safe and proper operation of the product.
please consult the instruction manual to ensure safe and proper operation of the product.
please consult the instruction manual to ensure safe and proper operation of th
Distributed by:
Video output terminal
Type of coaxial cable and maximum length
• Cable type RG-59U (3C-2V), 250 m maximum
• Cable type RG-6U (5C-2V), 500 m maximum
• Cable type RG-11U (7C-2V), 600 m maximum
Y/C signal output terminal
Type of coaxial cable and maximum length
• Mini-DIN round type 4-pin, 10 m maximum
SSP terminal
Power supply terminals
24 V AC and 12 V DC dual power capability
eliminates limitations on camera location.
Synchronization
signal input terminal
67
136
1
126.5
ADJ. LOCK
DIGITAL
COLOR CCD CAMERA
FLANGE BACK
28
15.4
1/4"–20 UNC threaded hole
25.2
(top / bottom selectable)
automatic switching
12 V DC ––– 2-pin terminal (rear)
*Specifications subject to change without notice
*Specifications subject to change without notice
*Specifications subject to change without notice
Camera Set-up Unit
VAC-60
(sold separately)
Remote set-up makes you feel you have the camera right
beside your monitor. Capable of setting up VCC-6975P
for all on-screen menu items (intelligent digital motion
detector, backlight compensation, white-balance, etc.)
For better picture quality, disconnect this unit after
settings are completed.
9.5
VAC-60
MODEL
Video output terminal
Camera input terminal
Environmental conditions
Power requirement
Dimensions
Weight (approx.)
AC adaptor
(for VCC-6975P)
VCA-35E
(sold separately)
MODEL
Power requirement
Power consumption (approx.)
Dimensions (approx.)
Weight (approx.)
Lenses for 1/3" CCD camera
VCL-CS2LYA
Super Wide-angle Lens
VCL-CS4LY
Wide-angle Lens
VCL-CS8LY
Standard Lens
VA-TS6ZE-LY
x 6 Manual Zoom Lens
SSP corresponding devices
System Controller
SSP System Controller
Multiplexer
16-channel Duplex Multiplexer (Colour)
16-channel Duplex Multiplexer (B/W)
9-channel Duplex Multiplexer (Colour)
9-channel Simplex Multiplexer (B/W)
Realtime VCR
168-hour Recording + Realtime VCR
40-hour Recording + Realtime VCR
Time Lapse VCR
960-hour Recording Time Lapse VCR
168-hour Recording Time Lapse VCR
24-hour Recording Time Lapse VCR
*More models will be introduced soon.
SANYO Electric Co., Ltd.
Video Imaging Systems Division
© 2000 SANYO Printed in Japan
CURSOR
SET
VCC-6975P
VAC-60 rear panel
Monitor
VAC-60
BNC x 1
BNC x 1
Temperature: 0 C to 40 C [32 F to 104 F], Humidity: 10 to 90%
3 V DC, Alkali type AAA format batteries x 2
90(W) x 135(H) x 36(D) mm [3.54(W) x 5.32(H) x 1.42(D) in.]
230 g [8.1 oz.]
VCA-35E
220 ~ 230 V AC, 50 Hz
17 VA max.
68(W) x 62(H) x 100(D) mm [2.68(W) x 2.44(H) x 3.94(D) in.]
680 g [24 oz.]
VA-TS6ZME-LY
x 6 Motorized Zoom Lens
VA-TS10ZME-LY
x 10 Motorized Zoom Lens
VA-TS420PE-LY
Pinhole Lens
VA-TS2VE-LY
Vari-focal Lens
As of March 2000
VSP-7000
MPX-CD162P
MPX-MD162P
MPX-CD92P
MPX-MS92P
SRT-7168P
SRT-6000P
TLS-9960P
TLS-9168P
TLS-9024P
e product.
'00.3. AP
LENS
Advertisement
