Table of Contents
Advertisement
Watching Live Video
b Zoom Mode
When you switch to zoom mode, the displayed video can be enlarged centering on a specified point
on the view.
This feature works in playback mode as well.
1
1
Click
(
) on the control panel.
The button turns red to indicate that you
are now in zoom-in mode.
2
Click the center point for zoom-in.
Point to and click on the desired point on
the view; each time you click the same
center point, the displayed video
enlarges incrementally.
The zoom factor depends on the current
layout.
• When you are viewing the video
from a single-channel or 4-channle
DVR in the four-view layout:
Original size → x2 → x4 → x8 → x12
• When you are viewing the video
from a 4-channel DVR in the
single-view layout:
Original size → x2 → x4 → x6
3
To zoom out on the video after
zoom-in:
2
Click
(
) on the control panel. The
button turns red to indicate that you are
in zoom-out mode.
Each time you click the button, the
displayed video is scaled down
incrementally until it reverts to the
original size.
If the specified channel is masked,
you cannot use the zoom feature.
4
To revert to the original size:
Click one of the layout selector buttons
(
) or channel selector
buttons on the control panel. Then the
viewing pane switches to your selected
layout with the zoom factor reset to the
original size.
2
1
<Original size>
<X4>
<X2>
<X8>
<X12>
34
English
Advertisement
Table of Contents
