Table of Contents
Advertisement
Initial Set Menu
b [User ID] Window
This window allows you to register or deregister users authorized to log into the system. The DVR
Utility Software supports up to 32 authorized users.
• You must use the master computer to register, change, or deregister a user with user access
level ID4.
• For the default user account with user name ID4, you can only change the password, and
cannot change the user name or user access level or deregister the account.
● Window Elements and Their Functions
1
2
3
5
6
1
USER ID
Enter the user ID that identifies a user on
the network.
2
PASSWORD
Enter the password required to
authenticate the user at login time.
3
User access level buttons
Select one of the four user access levels by
clicking the corresponding radio button.
4
User registration list
This box lists the user name and user
access level of each registered user (but
does not display the password for security
reasons).
When you want to change or deregister a
user, select the user from this list.
89
English
(Required user access level: ID4)
By default, this window displays the
initial settings for user access levels
1 to 4.
5
Control buttons
•
:
Changes the registration information of a
registered user.
•
:
Registers a new user.
•
:
Deregisters a user.
6
DVR access limitation button
Accessible DVR groups and the
broadcasting range can be configured for
each user (see P93).
4
Advertisement
Table of Contents
