Sybase Replication Server 15 Installation Manual page 61

Installation Guide for UNIX
3 Enter:
./lmutil lmborrow SYBASE enddate [ time ]
where
endate [time]
Run
Note lmborrow
borrowed, and from the same user that starts Replication Server.
For example, the following command sets the end date at 1 p.m. on August
20th, 2005:
lmutil lmborrow SYBASE 20-aug-2005 13:00
The maximum borrow time is 30 days. Your license administrator can
reduce the maximum borrow time following the instructions in "Returning
a borrowed license early" on page 49.
4 Start Replication Server. The checked out license is borrowed.
5 Disconnect from the network.
Displaying status on a borrowed license
1 Go to $SYBASE/SYSAM-2_0/bin.
2 Enter:
./lmutil lmborrow -status
Returning a borrowed license early
1 Connect to the network.
2 Shut down Replication Server.
3 Go to $SYBASE/SYSAM-2_0/bin.
4 Return each borrowed license by entering:
./lmutil lmborrow -return [-c licfile]
[-d display_name] feature
For example, the following command returns the REP_SERVER license:
./lmutil lmborrow
$SYBASE/SYSAM-2_0/licenses -d
Renewing a borrowed license
1 Connect to the network.
2 Shut down Replication Server.
APPENDIX A
is the desired borrow end date.
from the same machine on which licenses are being
-return -c
SySAM Administration
myhost REP_SERVER
49