Sybase Replication Server 15 Installation Manual page 46

Installing Replication Server
Installing with a response file
./setup -options-template REP.response
./setup -options-template REP.response -is:javahome JVM
./setup - options-record REP.response
./setup - options-record REP.response -is:javahome JVM
34
You can install Replication Server using a response file in combination with a
console or silent installation. You must first create the response file.
You must provide the absolute path name for the response file you create.
Note
To create a response file, do one of the following at the command line:
• Enter the following command, where REP.response is name you choose
for the response file:
• HP-UX and Solaris:
• IBM AIX:
InstallShield creates an options template called REP.response. Edit the
template with the values you want to use during installation.
• Enter the following command at the command line, where REP.response
is a name you choose for the response file:
You must provide the absolute path name for the response file you
Note
create.
• HP-UX and Solaris:
• IBM AIX:
InstallShield runs the installation in GUI mode and captures all user
choices to a file called REP.response. You can also specify the
option to get the same results.
You can use REP.response for future installations of Replication Server, either
as is or edited for the new installation.
Editing the response file
1 Specify the installation location, where path is the full path and file name:
-P installLocation=path
-console
Replication Server