License Usage And Enforcement; Managing Licenses - Sybase Replication Server 15 Installation Manual

Sybase Software Asset Management
SERVER <network license server hostname> ANY <license server port>
VENDOR SYBASE
USE_SERVER
Managing licenses from multiple vendors

License usage and enforcement

10
3 Shut down the earlier individual license servers on each machine and point
the software to the new license server. Use the
SySAM utilities" on page 55) to do this, or edit the license.dat file on each
installation by adding these lines at the beginning of the file:
If you are not using the network license server for Replication Server
Case 3
version 15.0, no changes are required to the previous software. When fulfilling
Replication Server version 15.0 licenses, select the unserved license model and
copy the license locally on each installation. The software runs appropriately,
however, you lose the asset management functionality in this approach. See
"Choosing the appropriate license server configuration" on page 21 for the
pros and cons of using a network license server versus using a local license file.
If you use software from multiple vendors that use Macrovision's FLEXnet
technology, you can consolidate licenses from all vendors to centrally manage
the licenses. See Chapter 3, "Managing Licenses from Multiple Vendors," in
the FLEXnet Licensing End User Guide."
This section describes the licenses used by Replication Server and other
enforcement mechanisms.
• License Features Used – when Replication Server starts, it first checks out
a license for the base Replication Server, which is REP_SERVER.
• Number of licenses used – the number of licenses used for Replication
Server depends on the license type under which Replication Server was
licensed.
For Replication Server licensed under any of the Server license types such as
SR, SV, and so on, one license is checked out per Replication Server. Starting
additional Replication Server instances on the same machine does not check
out additional licenses.
For Replication Server licensed under any of the CPU license types such as CP,
SF, and so on, the number of licenses used is the number of physical CPUs.
utility (see "Using
lmpath
Replication Server